Ibanez BTB Bass Workshop Basse électrique 6 cordes avec étui multi-échelles - Gris transparent plat

Caractéristiques

• Dessus en loupe de peuplier / Okoumé / Corps d'aile en frêne

  • Un superbe plateau en loupe de peuplier avec un corps d'aile en okoumé/frêne offre des tons brillants et solides avec un sustain riche.

• Frettes moyennes en acier inoxydable

  • Les frettes en acier inoxydable sont durables et résistantes.

• Micros T1

  • Le micro T1 est un humbucker doté de deux bobines séparées montées individuellement qui fournissent :
    • Réponse des basses serrée
    • Milieu de gamme percutant
    • Haut de gamme clair
  • Offre une voix flexible adaptée à différents genres.
  • La hauteur de chaque bobine peut être réglée individuellement pour des ajustements de tonalité très nuancés.
  • Bords arrondis pour un confort ergonomique amélioré lorsqu'il est utilisé comme repose-pouce.
  • Les bobines montées individuellement permettent un positionnement légèrement décalé, rendant la surface du capteur parallèle aux cordes, améliorant ainsi le confort et la jouabilité.

• Construction à col traversant

  • Contribue à un sustain massif.
  • Fournit un accès fluide aux positions élevées du manche.

• Manche 5 pièces en érable/noyer avec tiges de renfort en graphite

  • Fournit une clarté tonale et une attaque supérieure.
  • Les tiges de renfort en graphite offrent un sustain massif et une excellente stabilité.

Specifications

• Neck Type: BTB6 for Multi Scale, 5pc Maple/Walnut with Graphite reinforcement rods, Neck-through
  - Top/Back/Body: Poplar Burl top, Okoume/Ash wing body
  - Fretboard: Bound Panga Panga fretboard, Abalone dot inlay
  - Frets: Medium Stainless Steel frets
  - Number of Frets: 24 (+ zero fret)
  - Bridge: MR5S bridge
  - String Space: 17mm
  - Neck Pickup: T1 neck pickup, Passive
  - Bridge Pickup: T1 bridge pickup, Passive
  - Equaliser: Ibanez Custom Electronics 3-band EQ with EQ bypass switch (passive tone control on treble pot) and 3-way Mid frequency switch
  - Factory Tuning: 1C, 2G, 3D, 4A, 5E, 6B
  - Strings: D'Addario® NYXL Single Strings (NYXLB032, NYXLB045, NYXLB055, NYXLB080, NYXLB100MS, NYXLB130MS)
  - String Gauge: .032/.045/.055/.080/.100MS/.130MS
  - Hardware Color: Black

Neck

    Scale : 939.8mm/37" - 876.3mm/34.5" 

    a : Width 54mm at NUT 

    b : Width 88mm at 24F 

    c : Thickness 20mm at 1F 

    d : Thickness 22mm at 12F 

    Radius : 950mmR 

Guitar Neck Diagram
a: Width of the neck at the nut
b: Width of the neck at the fret position specified by the neck dimension
c: Thickness of the neck at the first fret
d: Thickness of the neck at the fret position specified by the neck dimension
Radius: Radius of the fingerboard

Controls

With the bass held in the playing position, there are three small knobs located towards the lower edge of the body. Directionally, from the lower bout towards the neck these knobs control treble boost/cut, mid boost/cut, and bass boost/cut knob. Above these are two larger knobs closer to the bridge. Of these, the knob closest to the end of the body is the pickup balance, and the knob located towards the neck is the volume knob. There are two switches on this bass. The switch closest to the end of the body is a 3-way mid frequency switch. When the switch is in neck position, mid boost peak is at 250Hz. When the switch is in center position, mid boost peak is at 450Hz. When the switch is in bridge position, mid boost peak is at 700Hz. The other switch closer to the middle of the bass is the EQ bypass switch. When the switch is in neck position, the EQ is off. When the switch is in bridge position, EQ is on. When EQ is off, the treble knob works as a passive tone control knob.

Frequency Response

The bass boost/cut frequency curve has a peak at 20 Hz, the variable width becomes smaller toward the high range, and the variable width becomes zero at about 1000 Hz. The variable range of the peak frequency is approximately ±15 dB. The treble boost/cut frequency curve draws a mountain-shaped curve with a peak at around 10,000 Hz and zero variable range around 100 Hz. The variable range of the peak frequency is approximately ±15 dB. The mid-boost/cut frequency curve creates a bell-shaped curve that peaks at a specific frequency, and the variable range becomes zero near 20 Hz and around 10,000 Hz. The frequency peak can be switched to 700, 450 and 250 Hz. The variable range of the peak frequency is approximately ±15 dB.

Case

Hardshell case included