JBL Powered 18-Inch Flying Subwoofer
Délai estimé avant expédition : 3 à 5 jours. En cas de délai supplémentaire, nous vous contacterons rapidement.
Interest FREE financing available at checkoutThe VRX918SP is a powered, suspendable subwoofer system containing a 2268FF neodymium magnet, patented Differential Drive®, 18" woofer in a front-loaded, vented enclosure. The VRX918SP was designed specifically for use in arrays with the VRX932LAP Line Array speaker and VRX-AF Array Frame. In addition it may also be used in arrays consisting entirely of VRX918SP subwoofers.
Features
- Built-in JBL Drivepack® DPC-2 amplifier module designed by Crown provides 1500 Watts of peak Power. DSP based resident input module provides system optimization, EQ and crossover functionality.
- 18 inch, 2268FF dual voice coil, neodymium magnet Differential Drive® woofer for high-power capacity and
light weight. - Integral rigging hardware for simple connection of enclosures and optional array frame.
- 20 mm threaded pole socket for solid, secure satellite speaker mounting.
- Large port area for reduced distortion.
Specifications
Power
-
Power Rating: 1500 Watts Peak
-
Amplification: Dual-Bridged Technology™, Class D
-
Maximum Peak Output: 126 dB SPL at 1 m
-
Bandpass Nominal Impedance: LF: 2 × 2 Ohms
Frequency
-
Frequency Range: 31 Hz – 220 Hz
-
Frequency Range (-10 dB): 31 Hz – 220 Hz
Driver
-
LF Driver: 1 × JBL 2268FF 457 mm (18 in) dual voice coil Differential Drive® woofer with neodymium magnet
Enclosure
-
Material: 18 mm birch plywood
-
Finish: Black DuraFlex™ finish
-
Grille: Powder-coated, black, 16-gauge perforated steel with acoustically transparent foam
Connectivity
-
Inputs: XLR with loop-through
-
Outputs: 1 × XLR
-
AC Input Connector: Neutrik PowerCon (NAC 3MPA)
-
AC Loop Through Connector: Neutrik PowerCon (NAC 3MPB)
Controls & Processing
-
Input Attenuator: 0–16 dB
-
Selectable Crossover: 80 Hz or 120 Hz Low Pass
-
High-Pass: 80 Hz enable/disable for XLR loop-through
-
System Processing: DSP-based, resident in input module
-
System Management: DSP limiters for mechanical and thermal protection
Power Requirements
-
AC Operating Range: 90–132 VAC or 216–264 VAC, 50/60 Hz
-
AC Line Voltage: User selectable 120V/240V (-15%, +10%)
-
AC Current Requirements: 6 A per system @ 120V, 3 A per system @ 240V
Suspension / Mounting
-
Optional VRX-AF line-array frame kit or 10 mm forged eyebolts
Dimensions & Weight
-
Dimensions (H × W × D):
-
508 mm × 597 mm × 749 mm
-
20.0 in × 23.5 in × 29.5 in
-
-
Net Weight (each): 38.5 kg (85 lb)
Optional Accessories
-
VRX-AF array frame
-
SRX718S-CVR padded cover (works with WK-4S)
-
SS4-BK adjustable satellite speaker pole
-
WK-4S caster kit