MXR JD-M80 Bass D.I.+

The Bass D.I.+ features a D.I., separate clean and distortion channels, an array of controls to fine-tune your sound, and a noise gate trigger control to eliminate hum and hiss.

This pedal can be powered by a 9-volt battery, a Dunlop ECB003 9-volt adapter, or the DC Brick™, Iso-Brick™, and Mini Iso-Brick™ power supplies (not included).

Finally, all the essentials in one tough little box. You need a serious D.I. for playing live and laying down killer tracks. You've got to have a preamp and finely tuned EQ to add punch to your tones. And you definitely can't do without some rich, custom distortion. This one-of-a-kind pedal gives you the whole deal in a bomb-proof enclosure that will survive even the most out of control gigs-and players. Built with the highest quality components, the M-80 can give you eve everything from warmth and transparency to a volcanic roar, without making you scroll through menu screens or an indecipherable manual. Engage the color switch for some sweet preset EQ, then tweak your tone with three band control. Dial in your ideal distortion with the gain knob and blend just the right amount into your clean signal, then kick it on and off at will. The adjustable noise gate pours on the sustain and cuts out hum and hiss. With XLR and parallel 1/4" outputs and a phantom power switch, you'll never have a problem delivering your choice new tones.

Controls:

• PHANTOM/ GROUND enables Phantom Power or Ground Lift
• LEFT FOOTSWITCH toggles Effects on/bypass (red LED=on)
• RIGHT FOOTSWITCH toggles Distortion channel in/out (red LED at top of unit indicates Distortion channel active)
• BASS-MID-TREBLE EQ KNOBS are active when effect is on COLOR SWITCH activates a preset EQ optimized for bass (switch depressed down)
• CLEAN VOLUME and COLOR controls are active only in Clean Channel mode (Effect Footswitch on and Distortion off)
• DISTORTION CHANNEL MODE (Effect and Distortion Footswitches on) provides controls for Gain to set
• distortion level, Blend to mix distorted/ clean signal, and Volume
• GATE SWITCH and TRIGGER KNOB work interactively to provide an adjustable noise depressed down), the Trigger Knob sets the noise floor threshold, or sensitivity, to cut hum and hiss from the distortion signal

Specifications:

• Input Impedance: 2.2 MΩ
• Output Impedance
• Unbalanced: 150 Ω
• Balanced: 300 Ω
• Bypass Freq. Response: +0/-0.5 dB, 20 Hz to 20 kHz
• Tone Controls
  • Bass: ±18 dB, 60 Hz
  • Mid: ±10 dB, 850 Hz
  • Treble: ±12 dB, 4 kHz
• Noise Floor*
• Bypass: -102 dBV
• Clean Effect: -98 dBV
• Distortion Effect, Gate Off: -94 dBV
• Distortion Effect, Gate On: -98 dBV
• Volume Control Range: 40 dB
• Gate Trigger Range: 28 dB
• Sensitivity: -66 dBV at 1 kHz
• Bypass: Buffered
• Current Draw: 9 mA
• Power Supply: 9 volts DC

*A-weighted, all controls at mid position