Instruments de musique et matériel audio Gibraltar

Clam style L-Rod tom arm for easy and solid placement. Hex Tom Arm.

Description The Gibraltar SC-CBPM Cowbell Cowbell Mount lets you mount cowbells, blocks or tambourines to an adjustable percussion floor stand and...

The Gibraltar SC-MCW 8mm Metal Cymbal Stand Washer sits on an 8mm cymbal post to support cymbal felts and cymbals.

Gibraltar SC-3261 6" Short Felt Bass Drum Beater

Accepts 1/2" to 1" diameter tubes. Great for adding small tom or percussion accessory to cymbal stand.

Gibraltar Port Hole Protector Rings are designed to protect the ported hole cut into your bass drumhead. Available in 4 to 6-inch sizes, these two ...

This 3.5"x5" diameter sleeve holds up to six pairs of stickers. Detachable soft bag clamps to any stand.

The Gibraltar Pedal Spring Assembly is a steel pedal spring with a rocker attachment.

The Gibraltar L-Rod was designed to attach electronics, toms, accessories, and hand percussion to a set up. The clamp mounted side of the L-arm mea...

Gibraltar Floor Tom Legs are 21" long and are 12.7mm in diameter.

Use this rubber protector to help prevent your bass drum pedal clamp from scratching or marring your bass drum hoop.

Expand your drum rack or create a new set up from the ground up. Gibraltar Curved Rack Bars can be used over a bass drum, as side extensions or ver...

Flat Base stands bring the vintage flat base design with features for today's drummer. Low mass tripod with cast adjustments and Gibraltar's exclus...

Dunnett R-Class Wood Metal hoop Hybrid combines the strength of metal and the tone of wood hoop all in one. The maple hoop has a contoured designed...

The Gibraltar Boom Cymbal Stacker allows two cymbals of any size to be placed on top of each other with a mini boom arm between them. The assembly ...

The Gibraltar 17" Ball L-Rod Receiver and Clamp is a double platform with tube designed for use with Gibraltar ball L-Rods. This can be used with b...

12.7mm cymbal L-arm, with twin ratchet and grabber clamp. Mounts to cymbal stand.

The Vintage Style Snare Drum Butt Plate is designed to pair with the SC-GVSTO Vintage Throw Off. Upgrade the classic look with a modern build

These 2-1/4" (58mm) tension rods with 7/32" 24 threads are designed to fit with large floor toms and bass drums.

Fits all standard tension rods. Larger shaft and handle section for more tension.

Standard two way hinged grabber clamp for quick release. Accepts 1/2" - 1" diameter

The Gibraltar L-Rod was designed to attach electronics, toms, accessories, and hand percussion to a set up. The clamp mounted side of the L arm mea...

The Vintage Slingerland Style Snare Drum Throw Off was designed as an upgrade or replacement for the classic three point model. This throw off comb...

Triple-flanged heavy-duty 2.3mm chrome drum hoops for studio and stage. These hoops provide consistent shape, tension, tuning and a clear, open so...

The Gibraltar Gull Wing Bass Drum Spurs are strong but lightweight. They offer your drum the maximum support wiithout overkill. They come with an S...

Triple-flanged heavy-duty 2.3mm chrome drum hoops for studio and stage. These hoops provide consistent shape, tension, tuning and a clear, open so...

The 8mm Key Screw locks your bass drum beater in place when being screwed into the beater hub.

The Gibraltar 4-3/8" Bass Drum T Tension Rod comes in a pack of 4. They are 4-3/8" (112) long with an M6, 1.0 thread pitch, and tighten using a T s...

The Gibraltar nylon tension rod washers help you to keep your drum in tune. Store them in your gig bag to replace other washers that get lost

The Gibraltar SC-15F Universal Pedal Spring is a black steel pedal spring that is designed to work with most bass drum pedals.

The Gibraltar metal tension rod washers help you to keep your drum in tune. Store them in your gig bag to replace other washers that get lost.

The Gibraltar SC-0009 8mm Wing Screw is a replacement part that locks a cymbal stand tripod in place after it is either opened or collapsed.

The Gibraltar 4-3/16" Bass Drum T Tension Rod comes in a pack of 4. They are 4-1/2" (114mm) long with an M5, 0.8 thread pitch and tighten using a T...

The Gibraltar Light Weight Bass Drum Spurs come with cast mounting brackets and solid steel rods with rubber tips. These brackets allow the spurs t...

The Gibraltar 8mm ABS Long Cymbal Stand Tilter Sleeve protects and seats your cymbal on the cymbal stand tilter.

The Gibraltar 6mm Key Screw locks the U joint of a double pedal connector rod to the master and slave pedal beater axle of a doube bass drum pedal.

The Gibraltar Small Cymbal Stand Felts offer a soft but supportive seat for your cymbal to rest on while you play, so that your cymbal always rema...

The Standard Snare Drum Butt Plate. A key tension butt plate designed to work with snare drums that have a 2-3/4" mount hole spacing

The Gibraltar 4-3/16" Bass Drum Key Tension Rod comes in a pack of 4. They are 4-3/16" (106mm) long x 7/32 thread diameter, and tighten using a dru...

The Gibraltar Pedal Spring Tension Assembly is the is the pedal spring tension rod and locking nuts. This allows you to increase or decrease the te...

The Gibraltar ABS tension rod washers help you to keep your drum in tune. Store them in your gig bag to replace other washers that get lost

The Gibraltar 4-3/8" Bass Drum Key Tension Rod comes in a pack of 4. They are 4-3/8" (112) long x 6mm thread diameter, and tighten using a drum key.

Gibraltar Port Hole Protector Rings are designed to protect the ported hole cut into your bass drumhead. Available in 4 to 6-inch sizes, these two ...

Gibraltar Straight Cymbal Stacker