Instruments de musique et matériel audio

A unique, beautifully mellow sound, based on a revolutionary concept: the Special 20 was the first diatonic harmonica in the world with reed plat...

Designed for snare drums, the Concert Series snare wire is crafted with strands of specially formulated stainless steel alloy for a subtle snare re...

The Vintage Slingerland Style Snare Drum Throw Off was designed as an upgrade or replacement for the classic three point model. This throw off comb...

Triple-flanged heavy-duty 2.3mm chrome drum hoops for studio and stage. These hoops provide consistent shape, tension, tuning and a clear, open so...

Capture the unmistakable sound of Plexi-era British tube amps that defined the classic rock era. Full-stack character without the vintage amp price...

The Gibraltar Gull Wing Bass Drum Spurs are strong but lightweight. They offer your drum the maximum support wiithout overkill. They come with an S...

Triple-flanged heavy-duty 2.3mm chrome drum hoops for studio and stage. These hoops provide consistent shape, tension, tuning and a clear, open so...

The 8mm Key Screw locks your bass drum beater in place when being screwed into the beater hub.

The Gibraltar 4-3/8" Bass Drum T Tension Rod comes in a pack of 4. They are 4-3/8" (112) long with an M6, 1.0 thread pitch, and tighten using a T s...

The Gibraltar nylon tension rod washers help you to keep your drum in tune. Store them in your gig bag to replace other washers that get lost

The Gibraltar SC-15F Universal Pedal Spring is a black steel pedal spring that is designed to work with most bass drum pedals.

The Gibraltar metal tension rod washers help you to keep your drum in tune. Store them in your gig bag to replace other washers that get lost.

The Gibraltar SC-0009 8mm Wing Screw is a replacement part that locks a cymbal stand tripod in place after it is either opened or collapsed.

The Gibraltar 4-3/16" Bass Drum T Tension Rod comes in a pack of 4. They are 4-1/2" (114mm) long with an M5, 0.8 thread pitch and tighten using a T...

The Gibraltar Light Weight Bass Drum Spurs come with cast mounting brackets and solid steel rods with rubber tips. These brackets allow the spurs t...

The Gibraltar 8mm ABS Long Cymbal Stand Tilter Sleeve protects and seats your cymbal on the cymbal stand tilter.

The Gibraltar 6mm Key Screw locks the U joint of a double pedal connector rod to the master and slave pedal beater axle of a doube bass drum pedal.

The Gibraltar Small Cymbal Stand Felts offer a soft but supportive seat for your cymbal to rest on while you play, so that your cymbal always rema...

The Standard Snare Drum Butt Plate. A key tension butt plate designed to work with snare drums that have a 2-3/4" mount hole spacing

The Gibraltar 4-3/16" Bass Drum Key Tension Rod comes in a pack of 4. They are 4-3/16" (106mm) long x 7/32 thread diameter, and tighten using a dru...

The Gibraltar Pedal Spring Tension Assembly is the is the pedal spring tension rod and locking nuts. This allows you to increase or decrease the te...

The Gibraltar ABS tension rod washers help you to keep your drum in tune. Store them in your gig bag to replace other washers that get lost

The Gibraltar 4-3/8" Bass Drum Key Tension Rod comes in a pack of 4. They are 4-3/8" (112) long x 6mm thread diameter, and tighten using a drum key.

Gibraltar Port Hole Protector Rings are designed to protect the ported hole cut into your bass drumhead. Available in 4 to 6-inch sizes, these two ...

Evans clear EC2S series features two plies of 7mil film with optimized attack, tone, length of sustain and ease of tuning for each size head. The S...

Masters started out as an assemblage of twelve rides - exquisite and laboriously hand-manufactured cymbals made of CuSn20 bronze to achieve superio...

Sound Character: Dark, very dry, deep. Medium wide range, complex mix. Fairly soft, bouncy feel. Very controllable., Woody, pronounced, warm ping o...

The Blues DeVille 10-hole diatonic harmonica delivers bright, bold tone and uncompromised pro quality, with phosphor bronze reeds, moisture-resista...

Many of Fender’s Pure Vintage parts are crafted where possible on the same tooling and machinery as our original-era Fender parts. Whether you are ...

Delay changes everything. Subtly sweetened leads, clucky country slap back, surfy swells, rhythmic dotted-eighths and huge ambient washes – it’s b...

The Neo-Buster Humbucking from Fishman combines our popular Neo-D Humbucking pickup with a feedback-fighting soundhole cover to give you great soun...

Westbury C800D Double Braced Cymbal Stand

The Oasis OH-14 Case Plus+ Humidifier uses the same evaporative membrane as the OH-5 Plus+ Humidifier, providing 50% more daily humidity than eithe...

Shure BETA87C Cardioid Condenser Mic

Fender Amplifier 68 Custom Twin Reverb The guitarist with an eye and ear for late-'60s Fender silver panel style will love the '68 Custom Twin Reve...

D'Addario Humidipak is the only maintenance-free, two-way humidity control system for guitar. It automatically maintains the optimal 45%-50% relati...

Pearl’s original PowerShifter Eliminator was a giant leap ahead in bass drum pedals. The world’s only pedal featuring the patented Interchangeable ...

Cymbal Mount for MDS-25 and MDS-50KV The MDY-Stage is a cymbal mount for MDS-25 and MDS-50KV drum stands that is compatible with all V-Cymbal pads...

The DBS-10 is a telescopic cymbal stand for Roland V-Cymbals. While originally developed for the V-Drums Acoustic Design series, it’s equally at ho...

Roadworthy Tone PRS Archon speaker cabinets feature a closed back design, delivering punch and tight low end. The Celestion V-Type speaker was chos...

Genuine Fender 5-string bass bridge which will fit American Standard 5-string basses built from 2008 to 2016. Does not include mounting screws

One of the easiest ways to change the look of your Fender instrument is to replace the pickguard. This single-ply pickguard fits American, American...

Set of six locking tuning machines that can be retrofitted to nearly any Fender guitar having vintage-style tuning machines with 15/16" mounting sp...

One of the easiest ways to change the look of your Fender instrument is to replace the pickguard. This pickguard fits American Vintage series Jazzm...

Many of Fender's Pure Vintage parts are crafted where possible on the same tooling and machinery as our original-era Fender parts. Our Pure Vintag...

The “cut” 3-saddle top-load/string-through Tele bridge delivers classic Tele tone and feel with a stylishly sleek silhouette and flexible setup opt...