Morley WAH-Volume WVO - Used

** This item is used but works as it should **

Vintage Morley pedal in good condition for its age. 

The Wah in the Morley WVO has a response of seven octaves from 25 Hz to
4,000 Hz. This was designed to increase the flexibility to allow its use with
keyboards and bass guitar. Since the pedal range is far greater than the range the
guitar is capable of, the effect with the guitar is interesting. In the first ½” of travel,
the Wah peak is working in the two octaves below the last note on the guitar. The
only change the guitarist hears is in the volume of the guitar. This can be used
effectively in performance. Toe up to use it for rhythm, toe down ½” to play lead
and beyond ½” to play lead using the wah.

AS AN EXPRESSION PEDAL (VOLUME ONLY)

1. Be sure that the switch marked “WAH - VOLUME” on the right side of the
WVO pedal is off.
2. In the up pedal position (toe up, heel down), there should be no sound. As the
rocker pedal is pressed down, the sound level increases in relation to the angle of
the pedal. The level increases as you press downward on the pedal.

AS A WAH PEDAL
1. To use the WVO for Wah, push the “WAH - VOLUME” switch on the right
side of the WVO.
2. Pushing the “WAH - VOLUME” footswitch again returns the WVO to the
volume mode. Since a Wah uses a peak in the response to obtain the wah effect,
there will be differences in levels, depending on the position of the pedal at the
time the footswitch is pressed.