Godin xtSA - Trans Light Burst Flame
SKU 028672
by Godin
Original price
$2,579.00
-
Original price
$2,579.00
Original price
$2,579.00
$2,579.00
$2,579.00
-
$2,579.00
Current price
$2,579.00
Godin XTSA - Trans Light Burst Flame
A jack-of-all-trades and master of all of them, the xtSAs incredible sound power begins with three distinct voices: electric guitar, acoustic guitar, and synth.
The xtSA delivers big-time electric sounds via the Godin humbucker-single-humbucker pickup configuration and thanks to a special 5-way switch setup, extra meaty humbucker tones co-exist with glassy split-coil sounds in the second and forth positions. Turn down the electric output and raise the volume on the RMC transducer saddles and the xtSA becomes an incredibly authentic-sounding acoustic guitar. The acoustic voice of the xtSA is enhanced by an onboard preamp with a three-way graphic EQ. The two outputs are set up so that the electric and acoustic voices can be blended while using a single patch cord or at the amp/mixer via both outputs. Also, the xtSAs synth tracking, which simply put, is the best in the business. As with all of Godin synth-ready instruments, a built-in 13-pin connector provides direct access to all Roland GR-Series synths as well as most other 13-pin devices. All of this sound power would be a lot less interesting if the guitar didnt feel great but the xtSA sure does, thanks to the same 25 scale and mahogany neck used on the Godin LGX-SA flagship guitar. The Richlite fingerboard is shaped with Godins ergocut technique and equipped with medium jumbo frets. The body is made of a silver leaf maple center with poplar wings and is topped with a Premium grade veneer of highly figured Koa.
Top : Premium grade veneer of Figured Maple
Neck : Mahogany
Fingerboard : Richlite
Fingerboard Radius : 16" (406.4 mm)
Scale Length : 25.5" (647.7 mm)
Nut Width : 1.6875" (42.8625 mm)
Nut Type : Graphtech
Frets : 22
Machine Head Ratio : 18:1
Neck Pickup : Custom Godin humbucker
Middle Pickup : Godin Single Coil
Bridge Pickup : Godin Custom Humbucker
Bridge and Tailpiece : Floating Tremolo Bridge
Bridge Electronics : acoustic output, Tremolo Bridge with RMC transducer saddles and 13-pin output
Controls : 3 Outputs : electric, Acoustic, Custom Pre-amp with 3-band EQ, mix, Synth Volume, Tone, Volume
H.D.R : Not Included
Color : Lightburst Flame
Finish : High Gloss
String Set : E10
String Guages : .010 .013 .017 .026 .036 .046
Case : Gig Bag
A jack-of-all-trades and master of all of them, the xtSAs incredible sound power begins with three distinct voices: electric guitar, acoustic guitar, and synth.
The xtSA delivers big-time electric sounds via the Godin humbucker-single-humbucker pickup configuration and thanks to a special 5-way switch setup, extra meaty humbucker tones co-exist with glassy split-coil sounds in the second and forth positions. Turn down the electric output and raise the volume on the RMC transducer saddles and the xtSA becomes an incredibly authentic-sounding acoustic guitar. The acoustic voice of the xtSA is enhanced by an onboard preamp with a three-way graphic EQ. The two outputs are set up so that the electric and acoustic voices can be blended while using a single patch cord or at the amp/mixer via both outputs. Also, the xtSAs synth tracking, which simply put, is the best in the business. As with all of Godin synth-ready instruments, a built-in 13-pin connector provides direct access to all Roland GR-Series synths as well as most other 13-pin devices. All of this sound power would be a lot less interesting if the guitar didnt feel great but the xtSA sure does, thanks to the same 25 scale and mahogany neck used on the Godin LGX-SA flagship guitar. The Richlite fingerboard is shaped with Godins ergocut technique and equipped with medium jumbo frets. The body is made of a silver leaf maple center with poplar wings and is topped with a Premium grade veneer of highly figured Koa.
Specifications
Body : Silver Leaf Maple Center with Poplar WingsTop : Premium grade veneer of Figured Maple
Neck : Mahogany
Fingerboard : Richlite
Fingerboard Radius : 16" (406.4 mm)
Scale Length : 25.5" (647.7 mm)
Nut Width : 1.6875" (42.8625 mm)
Nut Type : Graphtech
Frets : 22
Machine Head Ratio : 18:1
Neck Pickup : Custom Godin humbucker
Middle Pickup : Godin Single Coil
Bridge Pickup : Godin Custom Humbucker
Bridge and Tailpiece : Floating Tremolo Bridge
Bridge Electronics : acoustic output, Tremolo Bridge with RMC transducer saddles and 13-pin output
Controls : 3 Outputs : electric, Acoustic, Custom Pre-amp with 3-band EQ, mix, Synth Volume, Tone, Volume
H.D.R : Not Included
Color : Lightburst Flame
Finish : High Gloss
String Set : E10
String Guages : .010 .013 .017 .026 .036 .046
Case : Gig Bag