Dunlop Cry Baby JR Special Edition Wah - White

POWER

The Cry Baby ® Junior Wah is powered by one 9-volt battery (accessed via the bottom of the pedal), the Dunlop ECB003

9-volt adapter, or or an MXR® BrickTM Series power supply.

OPERATION
1. Run a shielded instrument cable from your guitar to the

CBJ95SW’s INSTRUMENT jack.

2. Run another shielded instrument cable from the CBJ95SW’s AMPLIFIER jack into your amplifier input.

3. Turn on the amplifier and begin playing.
4. To turn the pedal on/off, push the top of the pedal down

until you hear a “Click”.

5. Located under the rocker at the heel of the pedal is an adjustable torque clutch that allows the amount of resistance the rocker has to being moved. Turn clockwise to increase resistance or counterclockwise to decrease resistance (wrench included). See TORQUE ADJUSTMENT diagram.

6. The VOICING switch allows you to change the frequency range of the CBJ95SW. Default setting is H—High, for the standard GCB95 sound. For a more vintage, midrange-focused sound, set the switch to M. For a lower frequency range, select L. See VOICING SWITCH diagram.

7. By rocking your foot back and forth on the mini pedal, you can instantaneously change the effect that the Cry Baby Wah has on the tone of your instrument.

Specifications

• Impedance:
  • Input Impedance: 800 kΩ
  • Output Impedance: <10 kΩ
• Wah Range Selector:
  • Range Selector Switch Positions:
    • H (Heel Down): 380 Hz to 2100 Hz
    • M (Mid Position): 330 Hz to 1800 Hz
    • L (Toe Down): 270 Hz to 1500 Hz
• Maximum Level:
  • Input: -8.0 dBV
  • Output: +10 dBV
• Maximum Gain:
  • Heel Down: +19.5 dB
  • Toe Down: +19.0 dB
• Noise Floor (A-weighted):
  • Heel Down: -98 dBV
  • Toe Down: -89 dBV
• Bypass:
  • True Hardwire
• Current Draw:
  • 3 mA
• Power Supply:
  • 9 volts DC