Ibanez SR2600 SR Premium 4-String Bass - Cerulean Blue Burst
Interest FREE financing available at checkoutSpecifications
Ibanez SR2600 Bass Guitar Specs| Neck type | Atlas-415pc Panga Panga/Maple/Paduak/Purpleheart/Walnut neck w/KTS™ TITANIUM rods |
|---|---|
| Top/Back/Body | Poplar Burl top African Mahogany body |
| Fretboard | Bound Panga Panga fretboard Abalone oval inlay |
| Fret | Medium Stainless Steel frets Premium fret edge treatment |
| Number of Frets | 24 |
| Bridge | MR5S bridge |
| String Space | 19mm |
| Neck Pickup | Nordstrand™ Big Single neck pickup Passive |
| Bridge Pickup | Nordstrand™ Big Single bridge pickup Passive |
| Equalizer | Ibanez Custom Electronics 3-band EQ w/ EQ bypass switch (passive tone control on treble pot) & 3-way Mid frequency switch |
| Factory Tuning | 1G, 2D, 3A, 4E |
| Strings | D'Addario® EXL165 |
| String Gauge | .045/.065/.085/.105 |
| Nut | Graph Tech® BLACK TUSQ XL® nut |
| Hardware Color | Gold |
NECK DIMENSIONS
| Scale | 864mm/34" |
|---|---|
| a: Width at Nut | 38mm |
| b: Width at 24F | 62mm |
| c: Thickness at 1F | 19.5mm |
| d: Thickness at 12F | 21.5mm |
| Radius | 305mmR |
DESCRIPTION
a: Width of the neck at the nut
b: Width of the neck at the fret position specified by the neck dimension
c: Thickness of the neck at the first fret
d: Thickness of the neck at the fret position specified by the neck dimension
Radius: Radius of the fingerboard
CONTROLS
DESCRIPTION
With the bass held in the playing position, there are three small knobs located towards the lower edge of the body. Directionally, from the lower bout towards the neck these knobs control treble boost/cut, mid boost/cut, and bass boost/cut knob. Above these are two larger knobs closer to the bridge. Of these, the knob closest to the end of the body is the pickup balance, and the knob located towards the neck is the volume knob. There are two switches on this bass. The switch closest to the lower edge of the body is a 3-way mid-frequency switch. When the switch is in the neck position, mid-boost peak is at 250Hz. When the switch is in center position, mid-boost peak is at 450Hz. When the switch is in bridge position, mid-boost peak is at 700Hz. The other switch closer to the middle of the bass is the EQ bypass switch. When the switch is in the neck position, the EQ is off. When the switch is in the bridge position, EQ is on. When EQ is off, the treble knob works as a passive tone control knob.
FREQUENCY RESPONSE
DESCRIPTION
The bass boost/cut frequency curve has a peak at 20 Hz, the variable width becomes smaller toward the high range, and the variable width becomes zero at about 1000 Hz. The variable range of the peak frequency is approximately ±15 dB. The treble boost/cut frequency curve draws a mountain-shaped curve with a peak at around 10,000 Hz and zero variable range around 100 Hz. The variable range of the peak frequency is approximately ±15 dB. The mid-boost/cut frequency curve creates a bell-shaped curve that peaks at a specific frequency, and the variable range becomes zero near 20 Hz and around 10,000 Hz. The frequency peak can be switched to 700, 450, and 250 Hz. The variable range of the peak frequency is approximately ±15 dB.
OTHER FEATURES
| Recommended Case | MRB500C |
|---|---|
| Gig Bag | Included |
| Luminescent Side Dot Inlay | Yes |
| Gotoh® Machine Heads | Yes |