Ibanez SR305ELB 5-String Electric Bass Left Handed - Weathered Black

Features

- 5pc Maple/Walnut neck
  - Provides tonal clarity and superior attack.

- Accu-cast B120 Bridge
  - Extra-wide string slots can accommodate even the heaviest of gauges.
  - The walls and channels of the new bridge plate effectively "trap" the saddles, ensuring perfect directional uniformity.

- PowerSpan Dual Coil pickups
  - Developed by Ibanez.
  - Exposed pole pieces produce a stronger signal and increase the response of higher frequencies without sacrificing low end.
  - Resulting tone is rich in harmonic detail and dynamic expression.

• Ibanez Custom Electronics 3-band EQ w/3-way Power Tap switch
    - Works in conjunction with a coil tap switch for maximum control over a wide variety of professional bass tones.
    - Tap Mode (single coil): Creates a punchy, dynamic sound with superior articulation.
    - Series Mode (humbucking): Delivers a full, warm tone.
    - Power Tap Mode: Combines the clarity of the single coil with the fat bottom end of the humbucker.

Specifications

• Neck Type
    - SR55pc Maple/Walnut neck
  - Top/Back/Body
    - Nyatoh body
  - Fretboard
    - Jatoba fretboard
    - White dot inlay
  - Fret
    - Medium frets
  - Number of Frets
    - 24
  - Bridge
    - Accu-cast B125 bridge
  - String Space
    - 16.5mm
  - Neck Pickup
    - PowerSpan Dual Coil neck pickup (Passive)
  - Bridge Pickup
    - PowerSpan Dual Coil bridge pickup (Passive)
  - Equaliser
    - Ibanez Custom Electronics 3-band EQ with 3-way Power Tap switch
  - Factory Tuning
    - 1G, 2D, 3A, 4E, 5B
  - Strings
    - D'Addario® EXL165 + .130
  - String Gauge
    - .045/.065/.085/.105/.130
  - Hardware Color
    - Black

Neck

Scale:
  - 864mm/34"
- Width:
  - 45mm at NUT
  - 68mm at 24F
- Thickness:
  - 19.5mm at 1F
  - 21.5mm at 12F
- Radius:
  - 305mm

Guitar Neck Diagram
a: Width of the neck at the nut
b: Width of the neck at the fret position specified by the neck dimension
c: Thickness of the neck at the first fret
d: Thickness of the neck at the fret position specified by the neck dimension
Radius: Radius of the fingerboard

Controls

With the bass held in the playing position, there are three small knobs closest to the lower edge of the body. Directionally, from the lower bout towards the neck knobs are treble boost/cut, mid boost/cut, and bass boost/cut. There are two larger knobs above these, closer to the bridge. The knob closest to the neck controls volume, and the knob next to it is the pickup balancer control. There is a 3-way power tap switch next to the balancer knob. When the switch is in neck position, the humbuckers are tapped. When the switch is in center position, the humbuckers are in series. when the switch is in bridge position, the humbuckers are in power tap mode, which is tapped with additional low end added.

Frequency Response

The bass boost/cut frequency curve has a peak at 20 Hz, the variable width becomes smaller toward the high range, and the variable width becomes zero at about 1000 Hz. The variable range becomes slightly larger in the high range than around 1000 Hz, but it becomes zero again near 5000 Hz. The variable range of the peak frequency is approximately ±15 dB. The treble boost/cut frequency curve draws a mountain-shaped curve with a peak at around 10,000 Hz and zero variable range around 100 Hz. The variable range of the peak frequency is approximately ±15 dB. The mid-boost/cut frequency curve creates a bell-shaped curve with a peak around 450 Hz, and the variable width becomes zero near 20 Hz and around 10,000 Hz. The variable range of the peak frequency is approximately ±15 dB.