Gibraltar

Triple-flanged heavy-duty 2.3mm chrome drum hoops for studio and stage. These hoops provide consistent shape, tension, tuning and a clear, open so...

7/8" diameter tube 10" down tube length 12". 12.7mm boom rod with hinged memory lock.

The Gibraltar L-Rod was designed to attach electronics, toms, accessories, and hand percussion to a set up. The clamp mounted side of the L-arm mea...

2.3mm heavy-duty chrome drum hoops provide consistant shape and tension for a clearer sound. 

Dunnett R-Class Wood Metal hoop Hybrid combines the strength of metal and the tone of wood hoop all in one. The maple hoop has a contoured designed...

The Gibraltar Steel Snare Wire is available in different sizes to work with 10", 12", 13", and 14" diameters and come in 12, 16, 20, and 42 strand...

Triple-flanged heavy-duty 2.3mm chrome drum hoops for studio and stage. These hoops provide consistent shape, tension, tuning and a clear, open so...

Triple-flanged heavy-duty 2.3mm chrome drum hoops for studio and stage. These hoops provide consistent shape, tension, tuning and a clear, open so...

The Gibraltar 17" Ball L-Rod Receiver and Clamp is a double platform with tube designed for use with Gibraltar ball L-Rods. This can be used with b...

Make your cymbal stand do double duty! With this cymbal arm, you can clamp the Grabber to one of your existing stands and add another cymbal to you...

Make sure your drums are tuned and ready to go. These 2" (52mm) tension rods with 7/32" 24 threads are designed to fit with large toms and floor toms.

Standard two way hinged grabber clamp for quick release. Accepts 1/2" - 1" diameter

Expand your drum rack or create a new set up from the ground up. Gibraltar Curved Rack Bars can be used over a bass drum, as side extensions or ver...

12.7mm cymbal L-arm, with twin ratchet and grabber clamp. Mounts to cymbal stand.

A low mass, height adjustable hi-hat stand with double braced base for maximum stability and easy transport. The Gibraltar 5707 Medium Weight Hi-Ha...

6mm Cymbal Sleeves fit over threaded portion of cymbal mount to protect cymbals. (4 pk) 

The Gibraltar 6mm Key Screw locks the U joint of a double pedal connector rod to the master and slave pedal beater axle of a doube bass drum pedal.

6MM LT Duty Wing Nut 5/Pack 

Gibraltar SC-0008 Wing Screw - 6mm, Pair Gibraltar 6MM Wing Screws Qty 2 Item Number: SC-0008 Product is brand new in original package  

The 8mm Key Screw locks your bass drum beater in place when being screwed into the beater hub.

The Gibraltar ABS tension rod washers help you to keep your drum in tune. Store them in your gig bag to replace other washers that get lost

Adjustable grabber clamp with angled centre and offset 360 degree clamps. Both clamps rotate on ratchet tilters. Accepts 1/2" - 1" diameter.

The Gibraltar Ball L-Rod will fit any of the Gibraltar L-Rod platforms and in many manufacturers' original tom moutning systems. The ball L-Rod giv...

The Gibraltar SCBGC Grabber Multi Clamp double clamp assembly accepts 1/2" through 1" diameters. 

Fits in most standard bass drum pedals.

Gibraltar SC-3261 6" Short Felt Bass Drum Beater

The Gibraltar Bass Drum Claw Hook is a universal claw hook for wood bass drum hoops.

Use these felt strips to muffle your bass drum without a pillow. Attach them to the inside of your head.. 2-1/4 inch. wide. Mounts inside the bass ...

Quickly and accurately cut a sound hole in your resonant bass drum head. The Gibraltar Bass Drum Port Hole Cutter features a simple blade and pin t...

Use this rubber protector to help prevent your bass drum pedal clamp from scratching or marring your bass drum hoop.

The Gibraltar 4-3/16" Bass Drum Key Tension Rod comes in a pack of 4. They are 4-3/16" (106mm) long x 7/32 thread diameter, and tighten using a dru...

Gibraltar's Bass Drum Riser elevates an 18-inch or 20-inch kick drum two inches off the floor. It allows optimal alignment with your pedal beater.

The Gibraltar 4-3/8" Bass Drum T Tension Rod comes in a pack of 4. They are 4-3/8" (112) long with an M6, 1.0 thread pitch, and tighten using a T s...

The Gibraltar 4-3/16" Bass Drum T Tension Rod comes in a pack of 4. They are 4-1/2" (114mm) long with an M5, 0.8 thread pitch and tighten using a T...

The Gibraltar Boom Cymbal Stacker allows two cymbals of any size to be placed on top of each other with a mini boom arm between them. The assembly ...

Clam style L-Rod tom arm for easy and solid placement. Hex Tom Arm.