Voodoo Lab

For pedals with higher voltage requirements, the Voltage Doubler cable (PPY) will combine two 9V or 12V Pedal Power outputs to create a single 18V ...

The most widely used cable with a 2.1mm straight and a 2.1 mm right angle connector and standard (center negative) polarity. Used with a majority o...

Voodoo Lab's voltage doubling cable easily handles your pedals with higher voltage requirements. This voltage doubling reverse (center positive) 18...

The most widely used cable with a 2.1mm straight and a 2.1 mm right angle connector and standard (center negative) polarity. Specifications Power S...

For pedals with higher power requirements, the Current Doubler Adapter combines the current of two outputs to power a single pedal. It is mos...

The HX Current Doubler Cable (PPHX) combines two high current Pedal Power outputs (400mA or greater) to power Line 6 HX Effects, Stomp, or Stomp XL...

** This pedal is used but still in very good condition ** The Octavia is a fuzz which creates the octave doubling effect (one octave higher) made f...

A 2.1mm right angle barrel connector on a 36 inch/92 cm cable terminating with a bare end. DIY parts are recommended for users who have experience ...

A 2.1mm straight barrel connector on a 36 inch/92 cm cable terminating with a bare end. Recommended for users who have experience soldering cables ...

A 2.5mm straight barrel connector on a 36 inch/92 cm AC cable terminating with a bare end. DIY parts are recommended for users who have experience ...

The most widely used cable with a 2.1mm straight and a 2.1 mm right angle connector and standard (center negative) polarity. Used with a majority o...

The most widely used cable with a 2.1mm straight and a 2.1 mm right angle connector and standard (center negative) polarity. Used with a majority o...

The PPL6 cable features a 2.1mm straight barrel connector to a 2.5mm (red) straight barrel connector with reverse polarity (center positive) design...

The battery snap cable allows battery-operated effects without a DC power jack to be powered from a Pedal Power® isolated output. The PPBAT featur...

A cable with 2.1mm right angle connectors and reverse (center positive) cable polarity made for JangleBox, some Fulltone pedals, some Moogerfooger ...

2.1mm Straight and Right Angle Barrel Cable The most widely used cable with a 2.1mm straight and a 2.1 mm right angle connector and standard (cente...

The most widely used cable for powering effect pedals. The Pedal Power Standard Cable 12-Pack (PPPK-12) includes twelve (12) 2.1mm standard center ...

Replacement cable set for all 8-output Voodoo Lab power suppliesIncludes:- 6 cables with 2.1mm right angle barrel center negative plugs - 18 in/46 ...

Cable with 2.1 mm and 2.5 mm (red) angle coaxial connector and reversed polarity (center plus) Suitable for line 6 DL4 / MM4 digital modelling, eve...

An 18″ cable with 2.1mm straight barrel connectors and reverse (center positive) cable polarity made for JangleBox, some Fulltone pedals, some Moog...

The Pedal Power AC Cable features two (2) 2.5mm straight barrel connectors and powers units like the Digitech Whammy, Line 6 Digital Modelers and M...

The Output Splitter Adapter (PPAV) allows two pedals to share a single Pedal Power output. This splitter features a single BLACK 2.1mm barrel p...

This Voodoo Lab Pedal Power Cable Pack lets you save cash on the Pedal Power cables your guitar rig demands. Made to power all of your BOSS, MXR, D...